PREPARATION
19
DVD Setup (Continued)
Initial Settings
You can set your own Personal Preferences on the
DVD+VCR.
Initial Settings General Operation
11
Press DVD, then press SETUP/MENU to display
the SETUP menu.
22
Press
vv
/
VV
to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
33
While the desired item is selected, press
BB
, then
vv
/
VV
to select the desired setting.
44
Press ENTER to confirm your selection.
Some items require additional steps.
55
Press SETUP/MENU, RETURN, or PLAY to exit
the setup menu.
Language
Disc Language
Select a language for the disc’s Menu, Audio, and
Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, press number buttons to
enter the corresponding 4-digit number according to the lan-
guage code list on page 36. If you enter the wrong language
code, press CLEAR.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP/MENU.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Pan/Scan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
TV Output Select
It can be used to select the video output between S-
VIDEO OUT jack and COMPONENT VIDEO OUT jack.
S-Video: Select when you use S-VIDEO jack for TV
connection.
Component: Select when you use COMPONENT
VIDEO OUT jack for TV connection.
DVD
DVD
DVD
