Filter
Top Products
24
VCR Operation (Continued)
1100
Press
44
to choose the SPEED item.
Press
11
or
22
to choose the desired recording
speed (AUTO, SP or EP).
The AUTO mode determines how much tape is left
and switches speed from SP to EP, if necessary, to
complete recording the program. There will be some
picture and sound distortion at the point of the speed
change.
1111
Press
44
to choose the REPEAT item.
Press
11
or
22
to choose the desired repeat
(ONCE, WEEKLY, or DAILY).
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on a
certain day of every week.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
Tips
If the input data is wrong, press
33
to select the data
and correct it by pressing
11
or
22
.
1122
Press SETUP/MENU, the program will be
memorized at the VCR.
If the program preset time is past, the PAST TIME
PROGRAMMED message will appear on the TV
screen. Return to the incorrect program and program
it with the correct time.
If you had entered a past date, the timer recording
will be performed on that date of the next year.
Additional programs may be entered by repeating
steps 1-12.
Cable Users: If your cable hookup is via a TV convert-
er box, you can program multiple recordings only on
the converter box output channel. This is because the
converter determines what channel you view through
your VCR.
1133
Turn the DVD+VCR power off for a timer
recording to take place.
Tips
If you are finished programming and you want to set the VCR
to record the programs you have entered. A) MAKE SURE
YOU HAVE INSERTED A TAPE INTO THE VCR. B) YOU
MUST TURN OFF THE VCR BEFORE IT WILL RECORD
ANY TIMER PROGRAMS. (TIMER indicator lights). The
VCR is now set to record the preset programs.
Notes
If the power fails or the VCR is unplugged from the AC
outlet, the correct clock time and timer settings are kept in
memory for approximately 3 seconds. After 3 seconds, the
clock and program timer must be reset when power is
restored. Reset time according to instructions.
Checking (Erasing) the Timer Program
Programming can be checked whenever the VCR is
turned on.
1 Press SETUP/MENU and the MAIN menu will
appear.
2 Press 3 or 4 to choose the TIMER RECORD menu.
Press ENTER and the PROGRAM menu will appear.
3 Press 1 or 2 to select a program you want to check
or erase. If you want to erase the program, press
CLEAR.
4 Press SETUP/MENU to return to the TV screen.
Program Priority
If the recording start and end
times of preset programs
overlap on the same day
(see the example and dia-
gram left), program number 2
will not be recorded until pro-
gram number 1 is finished.
The first part of program number 2 will not be recorded.
The same thing will happen to program number 3.
PROGRAM 1
MONTH : JULY
DAY : 6 SAT
START : 6 : 00 PM
STOP : 7 : 30 PM
CHANNEL : 4 TV
SPEED : SP
REPEAT : ONCE
SELECT
TO EXIT PRESS
ADJUST
SELECT
TO EXIT PRESS
ENTER
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
PROGRAM 1
MONTH : JULY
DAY : 6 SAT
START : 6 : 00 PM
STOP : 7 : 30 PM
CHANNEL : 4 TV
SPEED : SP
REPEAT : ONCE
TO EXIT PRESS
TO ERASE PRESS