GoVideo DVR 4200 DVD VCR Combo User Manual


 
OPERATION
27
VCR Operation (Continued)
Tape Counter Memory Feature
Real-Time Counter
Shows length of tape run in hours, minutes, and sec-
onds (refer to the left). Press CLK/CNT to select the
real-time counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
Counter changes to “M 0:00:00” when the cassette is
ejected.
The real-time counter does not operate when nothing is
recorded on the tape.
The real-time counter will not work when the tape is not
inserted.
Counter Memory Function
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
11
Begin recording or playing a tape.
22
Press CLK/CNT repeatedly to display the real-
time counter appears on the TV screen.
33
At the point that you want locate later, reset the
real-time counter to “M 0:00:00” by pressing
CLEAR.
44
Continue to play or record.
55
Press STOP when recording or playback finish-
es.
66
Press REW.
The tape automatically stops when the tape counter
returns to about “M 0:00:00”.
Tape Remaining
This function allows the time of the remaining tape to be
displayed during recording or playback.
Press CLK/CNT until the REM indicator displays on the
TV screen during recording or playback.
Note
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind of
the tape (T-140, T-160, or T-210 etc)
Additional Information
In manual recording, Timer recording, One-Touch Recording,
playback, or fast forward modes, the VCR automatically
starts rewinding the tape at the end of the tape. The cassette
will stop at the beginning of the tape and be ejected, and the
VCR will turn itself off.
After you have finished using the VCR, rewind, eject, and
remove the cassette. Place the cassette in its protective
sleeve to protect it from dust. It is not necessary to rewind the
cassette before removing it, but if you do, it will be ready to
play or record the next time you use it.
Be sure the VCR Channel Selector is on the correct channel
you wish to record. The channel that is being recorded can
always be checked by setting the television on the VCR
channel (3 or 4) and pressing the TV/VCR selector to turn the
VCR’s VCR indicator on.
Do not attempt to hook up more than one television set to the
VCR for either recording or playback.
2:15 AM M 0:05:25 REM 1:07
CLOCK COUNTER REMAINING TIME