Filter
Top Products
Figure 23.
5.
Figure 23
6.
To remove the spur center:
1.
2.
3.
Figure 24
Figure 24.
Before beginning any turning operation
that uses the live center installed into the
tailstock quill, make sure the spur and
live centers are properly aligned (refer to
Aligning Centers on Page 33 for detailed
instructions). Failure to head this warning
could result in the workpiece being thrown
from the lathe, resulting in death or serious
personal injury.
Installing/Removing
Live Center
To install the live center:
1.
2.
Figure 25
Figure 25.