Filter
Top Products
Figure 38
Figure 38.
Figure 39.
Figure 39
Note: When turning in this manner, you must use
a free standing tool rest (not supplied).
Sandpaper
Workpiece
Wrapping the sandpa-
per completely around
the workpiece could pull
your hands into the mov-
ing workpiece and may
cause injury. Never wrap
sandpaper completely
around the workpiece!
Figure 40.
Outboard Turning Sanding/Finishing
Using the Lathe
Figure 40
Note: When using the lathe to sand or finish the
workpiece, remove the tool rest to prevent entan-
glement hazards. Use the slowest speed for safer
control and better results.