The tailstock quill lock lever MUST be tight
and firmly secure the quill in place before
beginning operation. Also, the quill should
not protrude from the tailstock more than
2" or the quill will not adequately support
the workpiece. Otherwise, the workpiece
could come loose and fly at the operator
or bystanders resulting in death or serious
personal injury.
3.
4.
5.
6.
Note: The more the quill is drawn back into
the tailstock, the greater the workpiece sup-
port.
7. Figure 25
To remove the live center:
1.
2.
3.
Installing/Removing
Faceplate
To install the faceplate:
1.
2.
Page 21
3.
4.
Figure 26
Figure 26.
Steps 3–4
Faceplate Turning
Page 26