Filter
Top Products
35
ENGLISH
Auto open while reading
the disc.
The disc is dirty or any scratched.
The format of the disc is not supported.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
Audio and video momen-
tarily pause while reading
disc.
The disc is dirty or scratched.
Check the TV system setting, switch PAL/NTSC TV system in setup
menu.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The player is on with start
logo and menu but has no
image from the disc.
The disc is dirty or any scratch.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The unit freezes while rea-
ding CD-R/DVD-R disc
Reset the device, when you see “ loading ” on the screen, press » « to
take out the disc, clean the disc and try it again.
If the device freezes again, the disc may have some contents the de-
vice can't support. Please stop playing the disc in this device.
TV screen and video
The images from this player
do not appear on the tele-
vision.
Picture is distorted.
Make sure that the LED/LCD-TV is connected to the VIDEO OUT so-
cket or HDMI OUT socket on this device.
Make sure that the LED/LCD-TVs input setting (e.g., VIDEO 1) is cor-
rect.
The device is likely to enter screen saver status.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
Video is not output in high-
definition.
High definition video cannot be output through the VIDEO OUT.
Confirm that the HDMI Resolution in the Setup menu is set properly.
The 4:3 aspect ratio picture
expands left and right.
Use the LED/LCD-TV to change the aspect. Refer to your LED/LCD-TVs
operating instructions.
When it is playing BD-LIVE
disc, Video output is a
black screen.
Insert a USB memory stick with a free space. Select BD-Live Storage
from the BD-Live Menulist. Then restart the device.
Please check the internet is available or not. Some of the disc need
the support of internet.
Please check the connection cable to the router. If it is loose, please
insert again.
INFORMATION
------------------------------------------------------------------------------------------------------------------