Filter
Top Products
ENGLISH
36
INFORMATION
------------------------------------------------------------------------------------------------------------------
Sound
No sound. Low volume.
Distorted sound.
Cannot hear the desired
audio type.
Check the connections and the “Digital Output” settings. Check the
input mode on the amplifier/receiver if you have connected one.
Press »AUDIO« to select the audio signal.
The sound effects (Re-master, V. Surround, etc.) will not work when the
bitstream signal is output from the HDMI OUT socket or the
»COAXIAL« socket.
When “BD-Video Secondary Audio” is set to “Off”, Dolby Digital
Plus, and Dolby TrueHD are output from the »COAXIAL« terminal as
Dolby Digital or DTS Digital Surround bitstream.
Cannot switch dubbed lan-
guage or the audio format .
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
There are discs for which audio cannot be changed because of how
the disc was created.
When connecting an amplifier/receiver using a coaxial cable or an
HDMI cable, you cannot switch the audio if “Digital Output” is set to
“Bitstream”. Set “Digital Output” to “PCM” or connect using audio
cables.
HDMI connections
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Change “TV Aspect ” type to “16:9 Wide”.
BD-Live and USB connections
Cannot connect network
Check if the disc is a legal copy.
Confirm whether the network connection is ok.
After network connection,
cannot download file
Check if the capacity of Storage is full. if it is full, please clear storage
in the BD-Live menu and reset the device.
Confirm whether the network connection is ok.
Change USB device and then test it.
Succeed in downloading
file, but playback pause.
Confirm the device is USB 2.0. if it is USB 1.1, playing may pause.
Pause playing the file in the
USB device
Change USB device and then test it.