Filter
Top Products
ENGLISH
13
TV MODE_______________________________________________
Basic functions
Switching on
1 Press »IO« on the television to switch it on.
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
Note:
This television is equipped with a highly-sophisticated computer.
After switching on the television, it takes about 20 seconds until
the operating system is loaded and you will then see a
picture.
Switching to and from standby
1 Press »Ǽ« to switch the television to standby.
2 Press »IO« on the television set to switch it off completely.
– This saves electricity.
Selecting channels
1 Press »1…0« to select channels directly.
2 Press »P+« or »P-« to move up and down presets one at a
time.
3 Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to confirm.
Selecting AV channels
1 To select AV channels, press »AV« to open the AV menu, press
»P+« or »P-« to select the AV preset and »OK« to confirm.
Adjusting the volume
1 Press »
Ǹ
« or »
Ƿ
« to change the volume.
Muting
1 Press »
p
« to mute the sound or switch it on again.
Showing and hiding programme information,
the date and time
1 Press »Ȅ« to show or hide the information.
Changing the picture format
The television automatically switches to the 16:9 format if this for-
mat is detected via the SCART socket.
1 To select the picture format, press »
E
« to open the »Picture
format« menu and press »P+« or »P-« to select the format.