Filter
Top Products
ENGLISH
29
RETROFITTING A DIGITAL RECEIVER
Operating the receiver with the television remote
control
Note:
The receiver must be connected and installed to the G bus on the
television set via the communication line.
Ǽ Switches the television off (standby).
1…0 Switches the television on from standby mode.
Selects channels directly.
? Displays information on the selected function.
You receive the station information of the digital
receiver after changing station or by looking in the
electronic TV guide.
E
Opens the »Format« menu.
Then use P+ or P- to make the selection.
PIP Displays an inset picture.
Returns to normal picture.
AV Opens the pre-selection for AV channels.
Then select with P+ or P-.
d Sound on/off (mute).
i Opens the television »EASY DIALOG« menu
(main menu).
You can find the main menu of the digital receiver in
the »EASY DIALOG« menu.
Z Switches back one menu level in the receiver.
P+, P- Switch the television on from standby;
Select stations step by step;
Move the cursor in the menus up and down.
ǸǷ Adjust the volume;
Move the cursor left/right.
OK Opens the station or favourites list on the receiver;
activates various functions.
TXT Switches between teletext mode and TV mode on the
television (only the television teletext can be used).
TV-G Opens and closes the electronic TV guide on the
receiver.