Grundig PHDQ 2002 BC Flat Panel Television User Manual


 
- 15 -
- 15 -
Bx 1A
112.0000 MHz
OUTPUT:
Bx 1A
Modulator:
OUTPUT:
on
/
+
/
The QAM signal is transmitted with a bandwidth of 8 MHz.
This means that you can only use the channel centre fre-
quency of the existing channel raster in the range of chan-
nels S21 … C69 (frequency raster 8 MHz). The frequency
raster is 7 MHz in the range of the lower channel ranges
( channel S20)
. If one uses the existing channel raster here,
this will result in interference (overlapping) of the 8 MHz
QAM signal packages and thus transmission problems.
For programming in this channel range, we recommend to
calculate the output frequency of the QAM modulator,
starting with the upper output frequency of the Cas-
sette listed in the “Specifications” going back in steps
of 8 MHz, or
starting with the lower output frequency of the Cas-
sette listed in the “Specifications” mov
ing up in steps
of 8 MHz.
Channel
Channel centre
frequency
[MHz
]
S 21 306.00
S 22 314.00
S 23 322.00
S 24 330.00
S 25 338.00
S 26 346.00
S 27 354.00
S 28 362.00
S 29 370.00
S 30 378.00
S 31 386.00
S 32 394.00
S 33 402.00
S 34 410.00
Channel
Channel centre
frequency
[MHz
]
S 35 418.00
S 36 426.00
S 37 434.00
S 38 442.00
S 39 450.00
S 40 458.00
S 41 466.00
C 21 474.00
C 22 482.00
C 23 490.00
C 24 498.00
C 25 506.00
C 26 514.00
C 27 522.00
Channel
Channel centre
frequency
[MHz
]
C 28 530.00
C 29 538.00
C 30 546.00
C 31 554.00
C 32 562.00
C 33 570.00
C 34 578.00
C 35 586.00
C 36 594.00
C 37 602.00
C 38 610.00
C 39 618.00
C 40 626.00
C 41 634.00
Channel
Channel centre
frequency
[MHz
]
C 42 642.00
C 43 650.00
C 44 658.00
C 45 666.00
C 46 674.00
C 47 682.00
C 48 690.00
C 49 698.00
C 50 706.00
C 51 714.00
C 52 722.00
C 53 730.00
C 54 738.00
C 55 746.00
Channel
Channel centre
frequency
[MHz
]
C 56 754.00
C 57 762.00
C 58 770.00
C 59 778.00
C 60 786.00
C 61 794.00
C 62 802.00
C 63 810.00
C 64 818.00
C 65 826.00
C 66 834.00
C 67 842.00
C 68 850.00
C 69 858.00