Filter
Top Products
- 16 -
- 16 -
Press the button.
—> The menu “Setting the LNB oscillator frequency”
– “LNB-Freq.:” is activated (page 18).
or
• Press the
button.
—> The sub menu “Modulator settings”
– “
OUTPUT:
Modulator” is activated.
Modulator settings (only Bx…A)
• By pressing the
buttons, switch the modulator
(HF output) “on” (default setting).
• Press the button.
—>
The display shows “OUTPUT:
LEVEL HF OUT:
”.
Setting output level of the channel strips (only Bx…A)
• Press the
button.
—> “OUTPUT: LEVEL CONTROL” appears in the display.
Note:
In this mode a digital carrier is set to the analogue pic-
ture carrier frequency of the output channel of the channel
Bx 1A
Modulator:
OUTPUT:
on
on / off
* )
Bx 1A
LEVEL HF OUT:
OUTPUT:
0
0 … -7
Bx 1A
LEVEL CONTROL
OUTPUT:
* )
* )