Filter
Top Products
- 18 -
- 18 -
• By pressing set the spectral position “normal” or
“inverse”.
• Press the button.
—> The menu “QAM monitoring” –
“MODE: Ueberwachung” is activated.
QAM monitoring (only Bx…A)
In this menu the signal at the Cassettes´ output is defined if
there is no input signal available:
– “Ueberwachung” (Monitoring): Single carrier,
– “KDG”: QAM modulated data flow.
Thus an automatic monitoring of the QAM modulated out-
put signal is possible.
• Use
to select “Ueberwachung” or “KDG”.
• Press the button:
—> The menu “Setting the LNB oscillator frequency” –
“LNB-Freq.:” is activated.
Setting the LNB oscillator frequency
• Use the
▶
◀
/
buttons to place the cursor under the number
to be changed and use to set the LNB oscillator
frequency.
• Press the button:
—> The menu “Setting the input symbol rate and the
DVB mode” – “INPUT SR=27500” is activated.
Überwachung
/
Monitoring
Bx 1A
MODE:
Ueberwachung
* )
Bx 1A
f = 10600 MHz
LNB-Freq.:
▶
◀
/