Filter
Top Products
16
SETTINGS
____________________________________________________________________________________
… with the manual search
1 Press »TUNER/BAND« to switch on the device.
– Display: The frequency band (» FM« or » MW«) and the frequency.
2 Select the frequency band (FM or MW) by pressing the »TUNER/BAND«
button.
3 Press »
5a
« or »
s6
« to tune to the required station. Hold down »
5a
«or
»
s6
« to start a search for the next radio station, or briefly press »
5a
«or
»
s6
« to change the frequency in small steps.
4 Tune to the station you want and then briefly press »SET« on the remote
control.
– Display: »SET« flashes.
5 Select the preset position with »PROGRAM UP/DOWN« on the remote
control.
– Display: e.g. »P8« flashes.
6 Press »SET« on the remote control to store the station.
– Display: »STORED«, then frequency band and frequency or the station
name, along with the preset position, e.g. » «.
7 To store more stations, repeat steps 3 to 6.
Note:
If a station transmits RDS information, the stereo system will store its name.
– Display: e.g. » F M 95.70«, followed by the station name.
Deleting stations
Stored stations are deleted if you
– re-start the automatic station search;
– assign new stations to individual preset positions.
8
FM87.50MHz
SET
P 8
8
STORED
8
RADIO Z
8