Haier HLC19K1 TV DVD Combo User Manual


 
1.Supporting media and file format:
Digital pictures (.JPG) and digital
music (.MP3)fites
Due to differences in the file code and
file mode, Itis possible thatsome
files cannot be read.
2. Before starting operation, verify
USB storage device is of FAT32and
FAT file system format. At present,
this television doesnot support NTFS
and the file systems of otherformat.
3.External card readersupports most
digital cards available in the market.
Readable digital cards are classified
according to the property of card
readers and can be connected to
mobile hard disks (working voltage
5.0V, working current notover 500mA).
4.The television operation may be
halted due to excessive rate of
information code errors. In such case,
restart the system. Please note -
there are many nonstandard USB
mobile devices inthe market. Ifa
nonstandard device is used then an
identification problem may occur.
To play pictures
1.Press USB buttonon the remoteto
enter stream media system.
The system start up takes about 3
seconds. Then insert the USBdrive
in the USBinput.
2. Press 4!t_ button to select Picture
folder. Press ENTER to enter.
3. Press A/V/4/_" button to select
desired picture, and then press
ENTER button to enterthe play
interface.
Q
1.Play mode: None/Dissolve/Wipe right/Wipeleft/
Wipe up/Wipe down/Boxin/Box out
2.Play time: Short/Medium/Long;
3.File name 4.Pause/Play
5. Duration/Rotate 6.Effect
7,tnfomation
4.Press the button on the remote control
to select theadjusted item, press
ENTER button to confirm.
f
1.Play or pause;
2.Stop;
3.Repeat;
4.No available:
5.No available;
6.Play previous picture;
7.Play next picture.
\ J
5.Press EXITbutton to return tothe
previous menu.
Press USB buttonto exit the USB
mode.
Note: you mayplaythepicturesamongselected.
@