HANNspree MAK-000011 Flat Panel Television User Manual


 
64
12
Troubleshooting
Situation Solution
No picture and sound.
Connect the power cord properly.
Press the POWER button on the control panel
or remote control.
Press the SOURCE button to cycle through
connected video sources.
Press the CH UP or CH DOWN button to switch
to other TV stations.
Check the TV/CATV OSD settings. See “Taking
Care of Your TV & Remote Control” on
page 63.
Make sure all cables are connected properly.
No picture, or poor picture, sound is
OK.
Check the antenna and cable connections.
Adjust the brightness in the OSD menus. See
“Brightness” on page 35.
Picture is not in color.
Adjust the saturation in the OSD menus. See
“Saturation” on page 39.
Make sure all cables are connected properly.
Picture is OK, no sound.
Make sure the source device is functioning
properly.
Make sure the audio cable is connected
securely.
Turn the mute off.
Press the VOL UP button on the control panel
or remote control.
Make sure the MTS option is set to MAIN or
MONO.
One of the speakers has no sound.
Adjust the balance in the OSD menus. See
“Balance” on page 46.
Make sure the audio cables are connected
securely.
Cannot receive some TV channels
using cable TV.
Try the Auto Program function in the OSD “TV
Setting” menu. See “Auto Program” on
page 52.
Want to reset TV settings.
Use the Preset function in the OSD Picture and
Audio menu.