Harbor Freight Tools 92427 Cable Box User Manual


 
SKU 94274 For technical questions, please call 1-800-444-3353 PAGE 20
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! 1. Prior to performing any inspection, maintenance, or cleaning of
the Blast Cabinet, turn the Power Switch (1A) to its “OFF” position and unplug
the unit from its electrical outlet. Turn off the air compressor. Press the Foot
Pedal (11) of the Blast Cabinet to release any remaining compressed air in the
system. Then, disconnect the compressor’s air hose from the Blast Cabinet.
Before each use,2. inspect the general condition of the Blast Cabinet and its acces-
sories. Check for loose screws, misalignment or binding of moving parts, cracked
or broken parts, damaged hoses, and any other condition that may affect safe op-
eration. If abnormal noise or vibration occurs, have the problem corrected before
further use. Do not use damaged equipment.
Before, during, and after use: 3. Periodically, check the Water Filter in the air com-
pressor system for excessive water build-up. If necessary, discontinue working
and drain the Water Filter.
To clean the exterior of the Blast Cabinet, 4. wipe with a clean, damp cloth
using a mild detergent or mild solvent.
Disposal of media: 5. Always follow local solid waste authority guidelines when
disposing of used media.
CAUTION! 6. All maintenance, service, and repairs not mentioned in this
manual must only be performed by a qualied service technician.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.