Filter
Top Products
30 HP High-Definition LCD TV Service Manual
Control Item Command Parameter Control Contents
REMOTE CON MODE R C M * _ _ _ REMOTE ACTIVE 0 = PC.
1 = Remote control.
2 = Enable both PC and
remote (Default).
S T C * * * _ SELECT (Analog
Channel)
Channel a Power ON.
1-125=channel 1-125.
126=map to Ch3.
127=map to Ch4.
255=tune to last channel
before turn power OFF.
S T A * * * _ SELECT (Digital, MAJOR
Channel)
1-999 (Major channel
number)
START CHANNEL
S T I * * * _ SELECT (Digital, MINOR
Channel)
1-999 (Minor channel
number)
CHANNEL LOCK C H L * _ _ _ ENABLE 1 = Enables channel lock
so cannot change channel
from current channel from
IR remote, usually the
START channel.
0 = Default (channel lock is
disabled).
START VOLUME S T V * * * _ SELECT 0-100 = Select volume
level on TV turn on.
255 = Retain last volume
setting (Default).
MIN VOLUME M N V * * * _ SELECT 0-100 = Select MIN
allowance volume setting,
0 = Default.
MAX VOLUME M X V * * * _ SELECT 0-100 = Select MAX
allowance volume setting,
100 = Default.
MUTE DISABLE M D I * _ _ _ SELECT 1 = Disable audio mute.
0 = Sound mute can be
activated (Default).