Filter
Top Products
5.3
Adjusting the Screen Quality
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to the
utmost and fine tune again. After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button to
display the menu.
Press the CH▼ button to
select “PC”, then press
the VOL + button.
PC
Move Select
Exit
Image
Image lock
Position
Color adjust
Recall
Auto adjustment
1024x768 48.3kHz 59.9Hz
3
Press the CH▼ button to
select “Coarse” or “Fine”.
Press the - VOL or VOL +
button to adjust the screen
quality, vertical stripes
appear or the picture may
be blurry.
PC
Move Select
Exit
Image lock
Coarse
Fine
2
Press the CH▼ button to
select “Image lock”, then
press the VOL + button.
PC
Move Select
Exit
Image
Image lock
Position
Color adjust
Recall
Auto adjustment
1024x768 48.3kHz 59.9Hz
4
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
PC DISPLAY
Coarse
1043
Adjust Exit
Move
<Adjusting Coarse>
Fine
50
Adjust Exit
Move
<Adjusting Fine>
09-CHAPTER 5_en 2/25/03 9:21 AM Page 3