Hitachi 26LD9000TA2 Flat Panel Television User Manual


 
19
ENGLISH
BASIC OPERATION
POWER On/Off
Now, turn On the main power of the unit. Make sure that the Power Cord
has plugged into the wall socket.
Ɣ To turn On the power of the television:
1. Press the Main Power switch on the television.
Ɣ The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote
control.
Ɣ The color of the Indicating Lamp turns into Green, and the image
will display on the screen.
Sub Power button
Ɣ To turn Off the power of the television:
1. Press Sub Power button either on the control panel or on the remote
control.
Ɣ The image disappears from the screen and the Indicating Lamp
turns into Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
The Indicating Lamp Status Check
Indicating Lamp
Status
Power Status Power Switch Status
Off Off Main power ШOff
Red Standby mode
Main power ШOn
Sub Power button ШOff
Green On
Main power ШOn
Sub Power button ШOn
Orange Power Save mode*
Main power ШOn
Sub Power button ШOn
* About Power Save mode, see
\
Power Save Mode
^
and
\
When Following Messages Appear on the Screen
^
on
35
and
36
for details.
NOTE
Ɣ If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
36
~
38
.
It may help you to solve the problems.
Ɣ You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Ɣ Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
Ɣ To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a blackout during use of the unit.
Main Power switch (on the left side)
Sub Power button
Indicating Lamp