Hitachi 26LD9000TA2 Flat Panel Television User Manual


 
39
ENGLISH
PRODUCT SPECIFICATIONS
SPECIFICATION 26LD9000TA2 32LD9000TA2
Display dimensions
Approx. 26 inches
(576 (H) ×324 (V)mm,
diagonal 660.5mm)
Approx. 32inches
(698 (H) x 392 (V) mm,
diagonal 801mm)
Panel
Resolution 1366 (H) x 768 (V) pixels 1366 (H) x 768 (V) pixels
Net dimensions
including Stand:
664(W)x508(H)x262(D) mm
excluding Stand:
664(W)x471(H)x118.5(D) mm
including Stand:
790(W)x585.5(H)x308.5(D) mm
excluding Stand:
790(W)x550(H)x120(D) mm
Net weight
including Stand:14kg
excluding Stand:12.5kg
including Stand:19.2kg
excluding Stand:16.5kg
Temperature Operating: 5°C to 35°C, Storage: 0°C to 40°C
Ambient
conditions
Relative Humidity Operating: 20% to 80%, Storage: 20% to 90% (non-condensing)
Power supply AC110 - 240V, 50/60Hz
Power consumption/at standby 105W/<1W 142W/<1W
Audio output Speaker total 14W 20W
(VIDEO input)
Input terminals
AV1.2: composite video input terminal (RCA)
S video input terminal
L/R audio input terminal (RCA)
AV3.4: component video input terminal (RCA)
L/R audio input terminal (RCA)
HDMI : HDMI input terminal
Input signals
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
Output signals
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OUTPUT (SUB-WOOFER): Woofer output terminal
(RF input)
Input terminal / Receiving range ANT: 75 Unbalanced / 44~870MHz
RF Video System
PAL B, G, H / I / D, K
SECAM B, G / D, K / K1
NTSC-M
(RGB input)
Input terminals
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
Input signals 0.7 V, analog RGB (Recommended Signal)
Sync signals H/V separate, TTL level [2k]
Ɣ The television takes at least 30 minutes to attain the status of optimal picture quality.