Filter
Top Products
25
ENGLISH
MENU OPERATION (continued)
Setup Menu (RGB mode)
With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
Setup
Auto Adjust
Image Position
Horizontal Clock
Clock Phase
Reset
Select
ŻŹ
Set Return
41
34
Ź
Ź
Reset
Selected Items Setup hint
Auto Adjust
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
• Press
OK
or Xbutton to start auto adjustment.
The message “Auto Adjusting” is displayed.
• Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
each item manually.
Image Position*
• Press
OK
button and ŸźWXbutton to adjust the horizontal
and vertical display positions.
Horizontal Clock*
0~100
Minimize the vertical stripes on the screen.
Clock Phase*
0~63
Minimize the blurring of the letters and stripes on horizontal
row.
• Make sure to adjust Horizontal Clock first
before adjusting
Clock Phase.
Reset
Image Position on this menu screen can be restored to the
original factory settings by pressing
OK
button.
Information
The items indicated by “
*
” can be automatically stored the setting depending on the signal mode.