Filter
Top Products
USING THE GENIUS REMOTE TO LEARN ADDITIONAL
FUNCTIONS FOR CLU-850GR
57
Set the LEARN/USE mode select switch located on the back of the Genius Remote to
the LEARN position.
Set the MULTI-PAGE select switch to "USER" position.
Press one of the learnable buttons on the Genius Remote, ("7" in this example). This
button will be used to store the new code. The READY indicator will flash at this time.
(The light will remain lit for approximately 15 seconds. If no other function is performed
at this time, the operation is canceled.)
The Genius Remote is ready to receive an infrared code from another remote.
Press and hold the button down on the other transmitter which contains the code to
be stored, while the READY light is flashing on the Genius Remote.
Release the button after both the READY and LEARN indicators light and then go off.
When storing has been performed correctly, the LEARN indicator lights for about 2
seconds.