Filter
Top Products
43
On-Screen Display
Video
Select VIDEO to adjust picture settings and improve
picture quality. You can independently customize each of
the Video Inputs to your preference to increase viewing
performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the
selected input will reset to initial conditions.
Picture Mode
Use this function to choose from automatic picture
settings to optimize your TV’s performance.
1. Use the CURSOR buttons
̇ or ̈ to highlight and
select PICTURE MODE settings (Day-Normal,
2. Then press the SELECT button to set the mode and
return to the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available for the customer
Day (Dynamic), Day (Normal) and Night mode.
Day (Dynamic) is the original factory preset mode , this
can be changed by adjusting any video setting to your
desire conditions. Day ( Normal ) can be used as a
second video setting for daytime viewing. Night is set
to watch programing during nigthtime.
1. Use the CURSOR PAD
̆ or ̄ or CHANNEL WHEEL to highlight the function to be adjusted.
2. Press the SELECT button or the CURSOR PAD
̈ to select the function settings.
3. Press the CURSOR PAD
̇ or ̈ to adjust the function.
4. Press MENU to return to main menu.
5. Press EXIT to quit menu.
Day-Dynamic or Night).
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear
natural.
Sharpness
Use this function to adjust the amount of fine detail in the
picture.
Picture Mode Day (Dynamic)
Next/Prev Select
SEL
Return
OR
OR
Video
White Level
Use this function to change the white level in the picture.
Black Level
Use this function to change the black level in the picture.
Color Temperature
Back Light
Motion Sharpness
Sharpness
Tint
Color
Black Level
White Level
Picture Mode
Air
Day(Dynamic)
100%
50%
62%
50%
High
Video
Move
SEL Select
Setup
Timers
Locks
TV Guide On Screen
Channel Manager
Audio
Video
Move SEL Select
Power Swivel
OR
50%
Off
Motion Sharpness
When moving picture occurs detail in the picture is lost
this function improves the picture detail in 3 modes Off,
Low and High.
Back Light
Use this function to change the back light of the LCD
panel, this will increase or decrease the brightness of
the LCD panel, but not the brightness of the video signal.
Color Temperature
Back Light
Motion Sharpness
Sharpness
Tint
Color
Black Level
White Level
Picture Mode
Air
Day(Dynamic)
100%
50%
62%
50%
High
Video
Move
SEL Select
Setup
Timers
Locks
TV Guide On Screen
Channel Manager
Audio
Video
Move SEL Select
Power Swivel
OR
50%
Off