Filter
Top Products
RGB ON SCREEN DISPLAY
74
RGB2 INPUT
This feature allows you to select between Mode A and Mode B depending on signal input to
RGB2 Input, depending on your preference.
V POSITION
H POSITION
AUTO ADJUST
SET UP
RESET
CLOCK PHASE
HORIZONTAL CLOCK
INPUT LEVEL
RGB2 INPUT
0
0
+22
0
MODE:1
0.7V
:
:
:
:
:
:
:
:
̇ ̈
CHANGE
VALUE
MOVE
EXIT
TO QUIT
RGB MODE MENU
Use THUMB STICK ̇, ̈ to toggle between Mode 1
or Mode 2 signal input to RGB2 Input.
INPUT LEVEL
Select the Input Level voltage between 0.7V and 1.0V.
V POSITION
H POSITION
AUTO ADJUST
SET UP
RESET
CLOCK PHASE
HORIZONTAL CLOCK
INPUT LEVEL
RGB2 INPUT
0
0
+22
0
MODE:1
0.7V
:
:
:
:
:
:
:
:
̇ ̈
CHANGE
VALUE
MOVE
EXIT
TO QUIT
RGB MODE MENU
Use THUMB STICK ̇, ̈ to select between 0.7V and
1.0V depending on the amount of brightness in the
picture.
NOTE: This feature is only available in RGB:2 input. See
page 29 for signal type for Mode 1 and Mode 2
PC VGA 480p 720p 1080i PC VGA 480p 720p 1080i PC VGA 480p 720p 1080i
REAL REAL REAL(1) X X REAL REAL REAL X X REAL X X X X
NORMAL NORMAL NORMAL(1) X X NORMAL NORMAL NORMAL X X NORMAL X X X X
FULL FULL FULL (1) FULL (2) FULL (2) FULL FULL FULL (3) FULL (2) FULL (2) FULL FULL FULL (2) FULL (2) FULL (2)
ASPECT
MODE
AVAILABILITY
RGB1 INPUT SIGNAL RGB2 INPUT SIGNAL
MODE 1 MODE 2
For numbers in ( ), please see corresponding note below.
RGB1/RGB2 ASPECT DISPLAY MODE.
NOTES: 1. Lack of raster can be seen in RGB1 when a 480p signal is input.
2. AUTO ADJUST function (see page 72) is not available in 720p, 1080i, and (480p/VGA~RGB2 Mode 2 only) input signal.
3. Horizontal Phase is shifted in RGB2 when 480p signal is input.
4. All FULL aspect mode, only 95% of information can be displayed (5% is treated as overscan).