Filter
Top Products
13
ENGLISH
The exact arrangement you use to interconnect various video and audio components to the Plasma
Television is dependent on the model and features of each component. Check the Owner's Manual
provided with each component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommo-
date your particular assortment of components. The diagrams are intended to show component video and
audio interconnections only.
Note: Select a appropriate external input mode
18
.
To connect the Plasma Television to a VCR with an S-Video cord
If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the
Plasma Television
,
you must also connect
the audio cords to the AUDIO IN jacks on the rear of the Plasma Television. The S-
VIDEO cord only carries the video signal. The audio signal is separate.
Note:
When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord
takes precedence over the video cord.
To S-Video OUT
To Audio OUT
Audio cord (not supplied)
S-Video cord (not supplied)
To S-VIDEO IN 1 (or 2)
Rear lower of the Plasma Television
To Audio/Video OUT
Audio/Video cord (not supplied)
To AV IN 1 (or 2)
To AUDIO
IN 1 (or 2)
Rear lower of the Plasma Television
Connections to other equipment
To connect the Plasma Television to a VCR
3U82001A [E] P13-17 1/11/05, 6:05 PM13