Filter
Top Products
44
Troubleshooting table/Specifications
In menu, TUNING-line
can not be selected.
The unit is set to AV mode. Press 1 on the remote
control.
Symptom Possible solution Page
No picture, no sound.
Switch on the set.
Check the 100~240 V wall outlet.
Select appropriate input mode.
No reception. Preset the station without using the AV cable.
Press 1 on the remote control.
Connect the antenna.
Check your antenna.
The TV switches off with
missing antenna input signal.
This is normal.
15 minutes after the antenna signal has disappeared,
the set will change to standby.
Troubleshooting table
Please check the following items, before you request for service.
18
12
12
23
20
Specifications
Color System:
Frequency Range:
Power Supply:
Power Consumption:
PDP:
HDMI input:
Output Power:
Surrounding temperature:
Operating Humidity:
Dimensions:
Weight:
Accessories:
PAL/SECAM/NTSC
1~S6, S7~S36, S37~E69
AC 100~240V, 50/60Hz
Operation: approx. 250W
Stand by: approx. 1W
41.6" TYPE (105.6 cm visible)
852 x 480 Pixel
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
10W x 2 (MAX)
Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Less than 80%RH
121(W) x 65.8(H) x 11.5(D) cm
approx. 34 kg (w/o Accessories)
2 batteries (AAA/R03/UM-4)
Remote control unit
AC cord
Weight and dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
During multi picture mode, sub
pictures are not displayed.
Sub pictures image might not be able to be displayed,
depending on the combination.
(Refer to the table of “2-picture mode”)
3U82001A [E] P43-BACK 1/11/05, 6:07 PM44