Filter
Top Products
PICTURE-IN-PICTURE (PIP)
33
(4) FREEZE (FRZ) button (With PIP ON)
If you wish to freeze the Sub-Picture, press the FRZ button. This is convenient when trying to write down the
address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion,
press the FRZ button again.
NOTE:
The FREEZE function will only operate when SINGLE PIP mode is chosen.
(5) FREEZE (FRZ) Button With PIP OFF
Press the FRZ button to freeze one or four frames of the picture, depending on the mode previously selected
(SINGLE or STROBE). To change FREEZE modes, use cursor
or to select which type of FREEZE mode
you wish to view. The new selection will appear the next tiem the FREEZE function is used.
SINGLE FREEZE
Press the FRZ button to freeze the picture you are currently viewing. Press this button again or PIP to return to
normal viewing.
STROBE FREEZE
Press the FRZ button to freeze four frames of the picture you are currently viewing. Press this button again or
PIP to return to normal viewing. This feature is useful for viewing a moving picture that has many details, for
example, a close play in a sporting event of golf swing.
CAUTION: A pattern burn may develop if the Sub-Picture is left in the same corner permanently. If the
PIP feature is used frequently, occasionally MOVE the Sub-Picture to a different corner. You may also vary its
position using the CURSOR , , , or buttons.
NOTE:
1. Only sound from the main picture can be heard.
2. Each freeze frame is delayed about 0.1 (1/10) second.
3. The FREEZE function will display blank sub-pictures when the COMPONENT: Y-CB-CR INPUT 2 source is
set as main channel.