Filter
Top Products
FRONT PANEL CONTROLS - 10 -
Used on all standard video and audio This connector is used on camcorders, VCRs,
cables which connect to inputs and and laser disc players with an S-Video feature
outputs located on the television's rear in place of the standard video cable to produce a
jack panel and front control panel. high-quality picture.
ANTENNA CONNECTIONS TO REAR JACK PANEL
VHF (75-Ohm) antenna/CATV(cable TV)
When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A
(75-Ohm) terminal.
FOLIOHG2
<IMG SRC="ObjFDE.PCX">
VHF (300-Ohm) antenna/UHF antenna
When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to screws of
the VHF or UHF adaptor. Plug the adaptor into the antenna terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer.
Consult your dealer or service store for the antenna mixer.
FRONT PANEL CONTROLS
FRONT VIEW
click for image of front panel
1 MENU button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using
the remote.
2 AVX (Audio/Video) selector/ENTER button
Press this button to select the current antenna source, VIDEO: 1, or VIDEO 2. Your selection is shown in the top
right corner of the screen. This button also serves as the ENTER button when in MENU mode.