Filter
Top Products
HOW TO USE THE REMOTE TO CONTROL YOUR TV - 14 -
remote. The remote will now control your VCR.
To operate your Cable Box, point the remote at the remote sensor of the cable box and press the CABLE button
on the remote. The remote will now control your cable box.
Click for Remote Control CLU-415UI Illustration
1 These buttons allow the remote to control your TV, VCR, or Cable Box depending on which mode is chosen, as
explained above.
2 TV/VCR BUTTON
When the remote is in TV or VCR mode, this is the TV/VCR buttons. When the remote is in CABLE mode, this is
the A/B button.
3 PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded VCR codes.
4 RESET BUTTON
Press RESET to return video and audio to factory settings.
5, 6 LIGHT BUTTON
When you are in a dark room, press this button on the side of the remote to light up the buttons shown in (5). The
light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to light
if the room is too bright.
HOW TO USE THE REMOTE TO CONTROL YOUR TV
1 POWER button
Press this button to turn the TV set on or off. If MESSAGE -1 or MESSAGE-2 is set, it will be displayed when the
TV is first turned on. (See page 23.)
2 RECALL button
When you want to check the channel being received, or if it has a stereo (ST) or second audio program (SAP),
press the RECALL button.
You can also check the time, and if the ON TIME or OFF TIME has been set. (See page 22.)
You can also use the RECALL button to quickly clear many of the other on-screen displays.
Click for image of remote control.
3 MENU, ENTER, CURSOR buttons