Filter
Top Products
HOOK-UP CABLES AND CONNECTORS
13
HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with
shielded video and audio cables that have phono connectors. For best
performance, video cables should use 75-Ohm coaxial shielded wire.
Cables can be purchased from most stores that sell audio/video products.
Below are illustrations and names of common connectors.
Before purchasing any cables, be sure of the output and input connector
types required by the various components. Also make sure the cables are
the correct length.
300-Ohm Twin Lead Connector "F" Type 75-Ohm
Coaxial
This outdoor antenna cable must be connected to Antenna
Connector
an antenna adaptor (300-Ohm to 75-Ohm). For connecting RF
signals (antenna or cable
TV) to the antenna jack on
the television.
Phono Connector S-Video (Super Video)
Connector
Used on all standard video and audio cables which This connector is
used on camcorders, VCRs,
connect to inputs and outputs located on the and laser disc
players with an S-Video feature
Television's front and rear jack panels. in place of the
standard video cable to produce
a high-quality picture.