Filter
Top Products
REAR PANEL CONNECTIONS
18
REAR PANEL CONNECTIONS
Click to see Rear Panel Connections.
Typical full-feature set-up. Follow connections that pertain to your
personal entertainment system.
CONNECTING TO REAR SPEAKER TERMINALS
Connect after turning the power of the TV OFF.
• Press the Right Speaker red button and insert the positive lead wire +
into the hole above the button. When the button is released, the wire is
locked into place. In the same manner, press the Right Speaker black
button and insert the negative lead wire -. Repeat this procedure for the
Left Speaker.
CAUTION: Do not connect Speakers simultaneously to the REAR SPEAKER
terminal of the Projection TV and Amplifier. This could damage both the
Projection TV and the Speakers.
Your Hitachi TV was designed to use 8 speakers only. Any other type may
degrade the audio performance of your entertainment system.
TIPS ON REAR PANEL CONNECTIONS
• The S-Video connection is provided for high performance laser discs,
VCRs, etc., that have this feature. Use this connection in place of the
standard video connection if your device has this feature.
• If your device has only one audio output, connect it to the left audio jack
on the TV.
• Refer to the operating guide of your other electronic equipment for
additional information on connecting your hook-up cables.