Filter
Top Products
FRONT PANEL CONTROLS - 12 -
When using a 300-Ohm twin lead from an outdoor antenna, connect VHF or UHF
antenna leads to screws of the VHF or UHF adapter. Plug the adapter into the antenna
terminal on the TV.
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the
cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.
FRONT PANEL CONTROLS
Click to see front panel diagram.
1 MENU/EXIT button
This button allows you to enter the MENU mode without using the remote. This makes it
possible to set TV features to your preference, without using the remote. This button
also serves as the EXIT button when in MENU mode.
2 INPUT selector
Press this button to select the current antenna source, VIDEO: 1, 2 or alternate antenna
source. Your selection is shown in the top right corner of the screen.
3 VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on
the TV screen. These buttons also serve as the cursor left and right buttons when in
MENU mode.
4 CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV
screen. These buttons also serve as the cursor down and up buttons when in MENU
mode.
5 POWER button
Press this button to turn the TV on or off.