Filter
Top Products
24
THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different
types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio equipment with one
touch. Basic operation keys are grouped together in one area. If you prefer to use the AV Network feature, switching remote con-
trol modes is not needed.
To operate your TV, point the remote control at the screen of the TV and press the TV button. The TV button will blink, indicating
that the remote will now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The VCR button will blink,
indicating that the remote will now control your VCR (see page 36 for instructions on how to program the remote to control your
VCR).
To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE (CBL) button. The CBL
button will blink, indicating that the remote will now control your cable box (see page 37 for instructions on how to program the
remote to control your cable box).
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and press the SET-TOP-
BOX (STB) button. The STB button will blink, indicating that the remote will now control your set-top-box. If you have a satellite
receiver, use this button to program your satellite receiver (see page 38 for instructions on how to program the remote to control
your set-top-box).
To operate your DVD player, point the remote at the remote sensor of the DVD player and press the DVD button. The DVD but-
ton will blink, indicating that the remote will now control your DVD player (see page 39 for instruction on how to program the
remote to control your DVD player).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and press
the CD, TAPE or AMP button. This button will blink, indicating that the remote will now control the desired component (see pages
40 and 41 for instructions on how to program the remote to control additional Audio equipment).
ቢ These buttons allow the remote to control your TV, VCR,
cable box, satellite receiver, DVD player, or other
Audio equipment depending on which mode is
chosen, as explained above.
ባ,ቤ LIGHT BUTTON
When you are in a dark room, press the light button ባ
on the remote to light up the buttons shown in ቤ and the
source button will blink. The light will stay on for about 8
seconds if any of the buttons are not pressed again.
These buttons will not appear to light if the room is too
bright.
ቢ
ባ
ቤ
ቤ
ቤ
ቤ
POWE
R
NFO
S
LEE
GU
ID
E
PIP
PIP
CH
S
WA
P
FREEZE
PIP MOD
E
PIP A
CC
E
SS
VIDE
O
RE
C
S
ELE
CT
A/V NET
S
P
E
C
ANT
SVCS
S
C
H
D
VID
1
V
ID
2
VID
3
VI
D
4
V
I
D
5
V
IR
T
A
L
THE REMOTE CONTROL