Filter
Top Products
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A DVD OR HDTV SET TOP BOX PLAYER WITH DOLBY DIGITAL COAXIAL OUTPUT TO INPUT
COMPONENT: Y-PBPR
1. Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set
below.
2. Connect the cable from the CB/P B OUT or B-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PB) jack.
3. Connect the cable from the CR/P R OUT or R-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PR) jack.
4. Connect the cable from the COAXIAL OUTPUT of the DVD player or HDTV Set Top Box to the COAXIAL INPUT jack.
5. Press the INPUT button, to view the program from the DVD player or HDTV Set Top Bx. The VIDEO icon disappears
automatically after approximately eight seconds.
6. Press the INPUT button to return to the previous channel.
DVDPlayer
HitachiModelor
HOWSET-TOPBOX SimiIarModel
Bad(ot lack ot
SET-TOp BOX player DVD player
VIDEO COP,XIAL
F OUTPUT_ OUTPUT
L ' '
NOTE: 1.
2.
3.
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
See page 15 for tips on REAR PANEL CONNECTIONS.
If your device is connected to INPUT 1 component jacks, make sure to select VID1-COAXIAL (DIGITAL) from
the THEATER-INPUT SOURCE menu. If it is connected to INPUT 2 component jacks, make sure to select
VID2-COAXIAL (DIGITAL) from the THEATER-INPUT SOURCE menu.
22