Filter
Top Products
SET UP
I ASPECT STYLE I
Fill
Choose this when receiving a 4:3 image and you do not want side
panels on the right and left sides of the screen. The television will
adjust the image both horizontally and vertically so it fills the
height and width of your 16:9 screen with no side panels added.
It will also maintain the correct image proportion. Use with
material such as letterboxed laserdiscs or VCR tapes.
Smooth Wide
Choose this when receiving a 4:3 image and you do not want side
panels on the right and left sides of the screen. The television will
proportionally adjust the image horizontally so it fills your 16:9
screen with no apparent distortion or side panels added.
_ome digital (ATSC format_
stations may transmit 4:3
images in a way that will
not allow expansion. You
will be unable to adjust the
screen format.
,. J
V. POSITION
Adjust this when viewing a COMPONENT: Y-PBPR signal, This feature is used to center an HDTV video signal between the top and
bottom gray bars, Adjustable range is -10(video center is toward bottom of screen) to +16(video center is toward top of screen),
COMPONENT COLOR TYPE
This function allows you to automatically change tint and color coordinates for DTV programs.
HDTV - High Definition Television - Use for High Vision Signal Y-PBPR from HDTV Set-Top Box,
SDTV/DVD - Standard Definition Television or Digital Video Disc Y-CBC R such as DVD (Digital Video Disc Player),
NOTES:
1. The aspect Style setting you select for an ANT input will automatically be set for the other ANT input. However, all three
video inputs have independent Aspect Style settings.
2. Youwillnot be able to access the V. Position menuifAspectStyle-Normalisset.
3. You will only be able to access the Aspect Style menu when viewing a 4:3-480i, 480P, or 720P input. When viewing a
16:9-1080i input you will not be able to access this menu.
4. If CONVERGENT COLOR TYPE is set improperly (does not match actual input signal), the color and tint of the main
picture will be abnormal.
5. You must be tuned to VIDEO: 1 or 2 input and have a component hooked up to the Y-PBPR input jacks to
access this component color type.
6. All component color type settings will affect only color component input you are currently viewing, if you are using
both sets of component input jacks, be sure to set the component color type feature for both inputs (set COMPONENT
1 AND COMPONENT 2).
49