Filter
Top Products
PICTURE-IN-PICTURE IPIP)
PICTURE4N-PICTURE CONT.
SURF MODE PiP
This feature will automatically scan all active channel numbers (those set in memory) and display them as PiP sub-pictures, along
the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen.
PIP
NOTES: 1,
If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory. (see pages
43 and 44)
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANT A is selected as the main channel.
4. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated.
(_ SWAP button
If you wish to switch what is being shown on the main pictureto the sub-picture, press the SWAP button,
SINGLE
SWAP
SPLIT
SWAP
NOTES: 1. The SWAP button will only operate when SINGLE PIP mode or SPLIT PIP mode is chosen.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
a sub-picture.)
(_,._)PIP MODE button
To change between the three different PIP modes (SINGLE, SPLIT, or SURF) press the PIP MODE button when PIP is ON.
Each press of this button will change PIP to a different mode. Pressing this button three times will cycle through all three
different PIP modes.
NOTES: 1,
2.
AN[A 10 I
Vl[]_._.J PipMODE
When main channel is COMPONENT: Y-PBPR input, only SPLIT PiP mode will be allowed. If sub-picture is changed I
to a COMPONENT: Y-PBPR using the PIP CH button, the PiP mode will automatically change to SPLIT mode.
SURF mode P P s on y a owed when ANT A s the man p cture.
30