Filter
Top Products
30
Multifunctional settings
INPUT Menu
Item
Description
COLOR SPACE
Using the buttons ▲/▼ switches the
mode for color spac
e
.
AUTO
RGB
SMPTE240
REC709
REC601
•
This item can be selected only for an RGB signal or a component
video signal
(except signals of 525i(480i)/625i(576i) from the
component
video port)
.
•
The AUTO mode automatically selects the optimum mode.
•
The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
COMPONENT
Using the buttons ▲/▼ switches the
function of COMPONENT
VIDEO port
.
COMPO
NENT
SCART RGB
When the SCART RGB is selected, the COMPONENT VIDEO port
function as a port for a SCART RGB signal input.
A SCART adapter
and SCART cable realize a SCART RGB input to the projector. For
details, contact your dealer.
VIDEO FORMAT
Using the buttons ▲/▼ switches the
mode for video forma
t
.
AUTO
NTSC
PAL
SECAM
N-PAL
M-PAL
NTSC4.43
•
This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port. For a component video signal, the signal type
is identifi ed automatically independently of this function.
•
The AUTO mode automatically selects the optimum mode
.
•
The AUTO operation may not work well for some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
With the INPUT menu, the items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION
EASY MENU
SCREEN
:SELECT
VIDEO FORMAT AUTO
COLOR SPACE AUTO
INFORMATION
COMPONENT COMPONENT