Filter
Top Products
23
CONNECTING A DVD PLAYER OR HDTV SET TOP BOX WITH DOLBY DIGITAL OPTICAL OUTPUT TO INPUT 1 or 2
COMPONENT: Y-P
B
P
R
1. Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set
below.
2. Connect the cable from the C
B
/P
B
OUT or B-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (P
B
) jack.
3. Connect the cable from the C
R
/P
R
OUT or R-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (P
R
) jack.
4. Connect the cable from the OPTICAL OUTPUT of the DVD player or HDTV Set Top Box to the OPTICAL INPUT jack.
5. Press the INPUT button, to view the program from the DVD player or HDTV Set Top Bx. The VIDEO icon disappears
automatically after approximately eight seconds.
6. Press the INPUT button to return to the previous channel.
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 13 for tips on REAR PANEL CONNECTIONS.
3. If your device is connected to INPUT 1 component jacks, make sure to select VID1-OPTICAL from the
THEATER-INPUT SOURCE menu. If it is connected to INPUT 2 component jacks, make sure to select VID2-
OPTICAL from the THEATER-INPUT SOURCE menu.
ANT A
TO
CONVERTER
ANT B
12345
678910
1112131415
AUDIO
L
R
(MONO)
VIDEO
VIDEO
AUDIO
(MONO)
L
R
AUDIO
(MONO)
L
R
VIDEO
S-VIDEO
Y
S-VIDEO
Y
B
R
P
P
B
R
P
P
S-VIDEO
L
R