Filter
Top Products
EN
PLAYING A DISC
This function allows you to select a specific language during
DVD disc playback when multiple language options are available.
Press AUDIO during playback.
Press
AUDIO repeatedly to select your desired
language.
2
1
DVD
Audio Language
This function shuffles the order of tracks instead of playback
in the original sequence.
In stop mode, press
MODE twice.
•
RANDOM screen appears
.
Press PLAY to start ran-
dom playback.
NOTES:
• To repeat the track in the random selection, press REPEAT
repeatedly until TRACK appears during playback.
• To repeat the entire random selection, press REPEAT
repeatedly until ALL appears during playback.
2
1
MP3CD
Program
NOTE:
•
The repeat setting will be cleared by moving to another track
.
•
Repeat playback does not function during A-B repeat playback.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every
time you press the button.
CD
REPEAT TRACK
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
TRACK
ALL
OFF
(current track repeat)
(
entire disc repeat)
(repeat
off)
Random Playback
NOTES:
• Repeat Title/Chapter is not available on some scenes.
• The repeat setting will be cleared when moving to other
titles or chapters.
CHAPTER
TITLE
OFF
(current chapter repeat)
(
current title repeat)
(repeat off)
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every
time you press the button.
DVD
Repeat
REPEAT TITLE / CHAPTER
• REPEAT is available only during playback.
This function allows you to
program an Audio CD and MP3
disc to be played in a desired
sequence.
In stop mode, press
MODE.
• The PROGRAM screen
will appear.
Press ▲ or ▼ to select a track, then press ENTER.
•
Press CLEAR to erase the most recently entered program.
Press PLAY to play the programmed tracks.
NOTES:
•
Press STOP once and then PLAY, playback will restart from the
point where STOP was pressed (program continued).
•
Press STOP twice and then PLAY, playback will restart from
the track in the usual way (program cleared).
• Up to 99 tracks can be entered.
• If eight or more tracks were in a program, use SKIP
HH
,
GG
to see all the tracks.
•
To repeat the current track in the program, press REPEAT repeat-
edly until TRACK appears during playback.
•
To repeat the entire program press REPEAT repeatedly until
ALL appears during playback.
• To erase all tracks in the program at once, select ALL
CLEAR and press ENTER at step , or press
OPEN/CLOSE and open the disc tray.
• While a MP3 folder is open:
–Press
BB
when you want to go to the next hierarchy.
–Press { when you want to go back to the previous
hierarchy (except for the top hierarchy).
2
3
2
1
MP3CD
CD-DA TOTAL 0:08:00
ENTER
ALL CLEAR
8 3:30
8 3:30
9 2:30
10 1:30
2/2
–
13
–
MP3
TRACK
ALL
OFF
(current track
repeat)
(entire disc
repeat)
(repeat
off)
GROUP
(current folder
repeat)
To return to a Marker later, press SEARCH MODE
four times (CD: three times) during playback and s or
B to choose the desired marker, then press ENTER.
NOTES:
•
Opening the disc tray, turning off the unit, or selecting AC (All
Clear) followed by ENTER will erase all Markers.
• To clear a marker, position the cursor on to the marker
number to be cleared by using s or B, and press CLEAR.
• You can mark up to 10 points.
Press SEARCH MODE or RETURN to exit.
5
4
English
A-B REPEAT
Press A-B REPEAT at your chosen starting point.
• A- appears briefly on the TV screen.
Press A-B REPEAT again at your chosen end point.
• A-B appears briefly on the TV screen, and the repeat
sequence begins.
To exit the sequence, press A-B REPEAT.
NOTES:
• The A-B repeat section can only be set within the current
title (for DVDs), or current track (for audio CDs).
• A-B repeat is not available with some scenes in DVD.
•
To cancel the A point which was set, press CLEAR.
• A-B repeat playback does not function during title, chap-
ter, track or all repeat playback.
3
2
1
CDDVD
E6112UD(EN/SP).qx3 05.4.4 17:27 Page 13