Hitachi CMP4221 Flat Panel Television User Manual


 
11
ENGLISH
Remote Control
l
Handling the Remote Control
Use the remote control within about 5m from the front of the unit’s
remote-control sensor and within 30 degrees on both sides.
1. Open the battery cover.
Slide back and remove the battery
cover in the direction of the arrow.
2. Load batteries.
Load two Size AAA batteries included observing the Polarities.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back
into place.
With in 30
de
g
rees
With in 30
degrees
About 3m
About 3m
About 5m
CAUTION
z Do not use new and old batteries together. The batteries could explode or
leak, resulting in fires, physical injury, or stains.
z When loading batteries, observe their correct polarities as marked on the
product. If loaded in the wrong direction, the batteries could explode or
leak, resulting in fires, physical injury, or stains.
ATTENTION
z Do not drop or impact the remote control..
z Do not splash the remote control with water or put it on a wet object.
z Before leaving the remote control out of use for an extended period of
time, remove the batteries from it.
z If the remote control begins to lack responsiveness, replace the
batteries.
z Strong light, such as direct sunlight, shining on the photoreceptor of
the remote control can cause operational failure.Position this unit to
avoid direct contact with such light.
POWER ON button
1
6
OK button
1
9
AUTO button
18
PIP button
2
5
1
6
POWER OFF button
1
6
POWER ON/OFF
btt
1
7
AV1 button
1
7
VOLUME UP/DOWN buttons
1
7
AV4 button
19
RETURN button
1
8
RECALL button
1
7
SIZE button
HDMI button
1
7
AV2 button
1
7
AV3 button
1
7
19
SELECT/OK buttons
RGB button
1
7
MENU button
1
9
1
7
MUTE button
Loading Batteries
Handing the Remote Control