Filter
Top Products
16
ENGLISH
OPERATING INSTRUCTIONS
Indicating lamp
SUB-POWER button
POWER ON/OFF
button
Main power switch
POWER OFF
button
POWER ON
button
Control Panel
Turing Power On and Off
To turn the monitor power ON, press the main power switch on the
monitor main unit to ON, and then press the SUB POWER button or
the ON/OFF or ON button on the remote control.
To turn the monitor power OFF, press the SUB POWER button or
the ON/OFF or OFF button on the remote control, and then press the
main power switch on the monitor main unit to OFF.
z During normal use, the main power switch is set in the ON position, and
the monitor can then be turned ON/OFF using the SUB POWER button or
the ON/OFF button on the remote control.
Indicating lamp
Indicating
lamp
Power status Operating
OFF OFF
When the main power switch is set
to OFF.
Lights red ON
When the main power switch is set
to ON.
Lights green ON
When the main power switch is ON,
and the ON button on the remote
control or the SUB POWER button
on the underside of the front of the
frame is ON.
ATTENTION
x
Avoid repeatedly turning the monitor on and off at short time intervals.
Failures might result from such operation.
x
Turn off the main power switch before leaving the monitor out of use for
an extended period of time.
x
If a power failure occurs while the main unit is running, it would be
powered on upon recovery from the failure. Turn off the unit main
power switch before leaving the main unit.