Filter
Top Products
27
ENGLISH
SETUP1 MENU
Language
Off Timer
Screen Wipe
Screen Saver
Off
Standby White
Inverse
Power Saving
English
Picture Image Audio Function Setup 1
050
Panel Lift
Off
Off
Off
Off
Normal
Language
Off Timer
Screen Wipe
Screen Saver
Off
Standby White
Inverse
Power Saving
English
Picture Image Audio Function Setup 1
050
Panel Lift
Off
Off
Off
Off
Normal
Setup 1
*Press "RETURN" button to return to Main Menu, then press “MENU” button to exit OSD.
Selected
characters
W X
Setup hint
Language
English
Français Espanõl
Sets the language for the OSD.
Off Timer
0
180
Set the display off time of unit 0 ~ 180 min.
Screen Saver
Off
5 Min.
15 Min.
30 Min.
This moves the picture around the screen in small amounts, at set intervals, to
reduce the panel image retention. This is where stationary objects such as
screen logos; leave a slight image visible after they should have disappeared.
Screen Wipe
Off
30 Min.
60 Min.
This is used to reduce the panel image retention that can occur with stationary
pictures by the white field signal. Select 30. Min or 60 Min. (time limit operation)
and press the OK button. Press the MENU button on the remote control to
return to normal viewing.
Standby White
Off
30 Min.
60 Min.
This function is also provided against the image retention. If time is set for this
item, the screen changes into the white pattern when the monitor enters power
save mode, and it will continue for the period of setting time.
Inverse
Off
On
60 Min.
This function can change each level of RGB signal invert to reduce the panel
image retention. When this function is required. Select On (continuous
operation) or 60Min. (time limit operation) and press the OK button. And press
the Menu or Return button to exit.
Panel Life
Normal
Extend 1
Extend 2
This function is to suppress the contrast of the screen regardless of the
Contrast setting in the Picture Menu. By this control, power consumption can be
reduced or degradation of a panel can be mitigated. The order of power
consumption is Extend 2 Extend 1 Normal.