Filter
Top Products
36
ENGLISH
PRODUCT PECIFICATIONS (Continued)
Signal Input
RGB Input (D-sub 15-pin connector)
Pin Input signal
1 R
2 G or sync on green
3 B
4 No connection
5 No connection
6 R.GND
7 G.GND
8 B.GND
9 No connection
10 GND
11 No connection
12 SDA
13 H. sync or H/V composite sync
14 V.sync. V.CLK
15 SCL
Frame GND
HDMI Input
Pin Input signal Pin Input signal
1 TMDS Data2 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3 TMDS Data2- 13 CEC
4 TMDS Data 1 14 Reserved(N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0 17 DDC/CED Ground
8 TMDS Data0 Shield 18 5V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock
S-input connector pin specifications
Pin Input signal
1 Y
2 Y-GND
3 C
4 C-GND
Frame GND
x
When different kinds of input signals are simultaneously input to the
monitor via a graphics board or the like, the monitor will automatically
select the signals in the following priority order:
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
*Even in the case of the recommended signals shown on the following
page, there may be instances when correct display is not possible. In
this case, use H/V separate sync, or H/V composite sync.