Filter
Top Products
25
Your HITACHI Plasma Television is equipped with a G-LINK
TM
feature. This connection is necessary for the
TV Guide On Screen
TM
system to enable VCR recording features. Once you setup the G-LINK
TM
(IR Blaster)
connector, then you can use your HITACHI Plasma TV Remote Control and TV Guide On Screen
TM
system to control your VCR recording features.
The Plasma Television Rear Panel has IR OUT/G-LINK
TM
terminals. One IR Blaster cable can connect up to
2 external Audio/Video components. Please see the following example of a G-LINK
TM
setup between your
HITACHI Plasma Television and external Audio/Video equipment (VCR).
1. Connect your external Audio/Video components to the Rear Panel shown below.
2
. Connect the IR Blaster cable to the IR OUT/G-LINK
TM
output terminal of the Rear Panel.
3. Place the IR Blaster in front of the infrared sensor of the external components you want to control.
NOTE: 1. The IR Blaster must be placed in front of the external components infrared sensor for the G-LINK
TM
feature to
work.
2.
G-LINK
TM
connections are available on both IR OUT terminals.
Connecting External Video Sources
V L R
OUTPUT
VCR
Infrared
Sensor
IR
Blaster