Filter
Top Products
9
How to set up your new HITACHI Plasma Television
This television has a TV Guide On Screen
TM
feature which has the ability to show you a customized list of the
programs and channels available in your area. The information for the guide is broadcast on different channels
in different areas.
Please use this TV Setup Wizard to help the TV Guide On Screen
TM
find the channels with the information for
your area.
The TV Setup Wizard automatically starts the first
time the TV is turned on.
Note:
1. If you see this screen when you turn on your TV for
the first time and did not yet connect your external
devices and cables to your TV, turn off your TV,
unplug the power cord and connect your devices
and cables according to the applicable connections in
2. After performing TV Setup Wizard operation, this
page will not appear again. For updating and
adding the channels available in your area refer
If this is the first time you have turned on your TV and the
TV Setup Wizard appear on-screen, start by selecting Yes
or No in the top portion of the TV Setup Wizard.
1. Use the CURSOR to select Yes or No and press the
SELECT button on the remote control.
Do you want the TV to find all of the channels
for the TV Guide On Screen
TM
?
Yes No
If Yes is selected proceed to step 2.
appear ( refer to page 54).
If No is selected, press the EXIT button on the remote
control and the TV Guide ON Screen
TM
Setup page will
2. Press the CURSOR to move to the next window to
select the source.
Source: Air
Please connect the antenna or cable
To the input labeled “Air/Cable”.
3. Press the CURSOR to select Air, Cable(1) or
the“
First Time Use” section of this Operating Guide.
to the Auto Channel Scan feature on page 57.
4. Press the CURSOR to move to the next
window to start the Auto Channel Scan.
Auto Channel Scan : Start
5. Press the SELECT button on the remote
control to begin scanning.
Air
Scanning Channel Number : 12
Analog Digital 12-123
Scan time may take 10 to 20 minutes
Cancel
When Auto Channel Scan is done the TV Guide On
Screen
TM
Setup page will appear (refer to page 54).
Cable(2).
First time use