Hitachi 20VR2B TV VCR Combo User Manual


 
Timer Recording
29
 For daily and weekly recordings refer to page 20.
 To make corrections in on-screen entries, press the Clear button or the
Channel Down key to move the flashing indication one space to the left.
Move this flashing indication over the numbers you want to change. Then
enter the correct number.
5 To set the Rec-On time, enter two digits for the hour, two digits for
the minute and "1" for AM or "2" for PM.
For example, for 9:30 PM, press 09 30 2.
6 To set the Rec-Off time, enter two digits for the hour and two digits
for the minutes.
For example, for 10:00 PM, pres 10 00.
 AM or PM will automatically appear when you have entered the hour
and minute.
7 To set Rec-On channel, enter two digits for the channel or, press the
Input button and select "LINE" to record from an external source.
For example, for channel 10, press 10.
(Operation continued on the next page)
8 Select the desired tape speed (SP, LP, or SLP) using the Tape Speed
selector.
9 To set the next program, press the Prog button and repeat steps 3 to
8.
10 To exit from the program mode, press the Prog button twice.
11 To set the timer, press the Timer button on, on the remote control.
The Timer indicator will appear.
Daily Recording
1 With the Rec-On day flashing, press the 4 key.
2 Continue with steps 5-11 on pages 19 and 20.