36
ENGLISH
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)
Setting Picture Adjustment (continued)
Selected Items Setup hint
Deep Color
Off
Enhance the color depth of picture during HDMI input.
On
Contrast Mode
Dynamic
It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast feeling.
Normal : Improve the contrast feeling to reproduce a faithful
gradation.
Linear : Reproduce as faithful gradation as possible.
This function is not available when "Deep Color" is "On" in HDMI
mode.
Normal
Linear
3D Color Management
Off
On : It automatically adjusts the suitable tint, color density, and
brightness on images.
Off : Set it off if the image does not look natural.
This function is not available when "Deep Color" is "On" in HDMI
mode.
On
Black Enhancement
Off
Adjusts the black level compensation.
This function is not available when "Deep Color" is "On" in HDMI
mode.
Low
Middle
High
3D Comb Filter
Off
This function is available only if D-sub 15 pin - composite cable is
used.
This reduces the dot and color blurring in minute scales so that it
can reproduce purer color.
This is not available for NTSC4.43, PAL60, SECAM, PAL-N and
PAL-M system.
This is available only when receiving NTSC3.58/PAL composite
signal.
Low
Middle
High
Reset
Each item on this menu screen can be restored to the
factory
settings by pressing the
OK
button.
Color Temp. Adjust
On
Amplitude
On: When you want to set specific adjustments in each of the 3
Color Temperature modes. You can adjust on the Amplitude
and Cut Off. The settings reect on the Color Temperature.
Amplitude: Subdue the colors (Red/Green/Blue) on the
brighter parts (-63~0).
Cut Off
: Subdue the colors (Red/Green/Blue) on the darker
parts (-31~+31).
Reset (Available when On): Select to restore amplitude and Cut
Off adjustments to default settings by pressing the
OK
button.
Off: Remains as default setting.
This function is not available when "Deep Color" is "On" in HDMI
mode.
Red
Green
Blue
Cut Off
Red
Green
Blue
Reset
Off