Filter
Top Products
Basic Operations
29
Rewinding the Tape
When you are done watching a video, you can rewind the tape automatically or
manually. If the videocassette reaches the end of the tape, the VCR will stop and
automatically rewinds the videocassette. If you press POWER while the tape is
rewinding, the power will shut off automatically after the tape has completely rewound.
Manual Rewind
Press STOP and REW. The VCR rewinds the tape all the way to the beginning, then
stops. Press STOP/EJECT on the VCR to release the tape.
Movie Return
If your videocassette has the safety tab removed and you set the MOVIE functions to
ON during initial setup, the VCR will stop and automatically rewind the videocassette,
eject it, and turn off the power when it reaches the end of the tape or a blank section of
tape which lasts for more than 30 seconds.
This function works only in PLAYBACK mode, not in RECORDING mode.
Special Playback Effects
Still Playback (Pause)
Press PAUSE to still the tape during play. The picture will "freeze". You may see some
minor noise or interference on the screen. This is normal.
After 5 minutes in PAUSE mode, the VCR automatically switches to STOP mode to
protect the tape.
If noise bars appear on the TV screen during PAUSE mode, first set the VCR to SLOW
mode and then press the 1 or 4 button on the remote control to minimize the noise bars.
If the screen jitters during PAUSE, press either 1 or 4 button to minimize it.
To resume play, press PLAY or PAUSE again.
Frame Advance
While in PAUSE mode during playback, press 9 button to view the video one frame at a
time. Press PAUSE to resume play.
Skip Playback
While playing back your tape you can skip forward by pressing the 9 button. The tape
will search ahead for about a minute and then resume playing.
Slow Motion
To slow the playback speed to exactly the pace you want, press PLAY, then then press
3 or 6 button. Press 6 to slow down, press 3 to speed up. The more times you press,
the slower or faster the slow motion.