Hitachi VT-F392A VCR User Manual


 
Basic Operations (VCR Plus + Recording)
38
newspaper TV section. Notice the small numbers to the right of the station name. These
are the VCR Plus+ channel numbers that you will use in the channel setup procedure.
3. If you don't get cable TV, make a list of all the broadcast channel numbers you
receive on your TV--for example, channel 4 WTTV (Ind.), channel 20 WFYI (PBS).
4. If you subscribe to cable TV, have your cable company's channel directory handy.
This should list all the channels as you receive them in your home, for example:
Channel 34 Arts and Entertainment Network
Channel 35 Turner Network Television
Channel 36 ESPN
5. Now you're ready to assign your local channels to VCR Plus+ channels in the VCR's
memory. The way you do this depends on how your VCR is hooked up to the incoming
RF signal. Decide which hookup you have from the diagrams below, and follow the
setup instructions for your type of hookup.
Hint: Try several practice recordings after doing your channel setup. You should get the
same channels as you usually watch at home.
 Home antenna or Cable (no cable box)
 Cable with a cable box
 Cable with a cable box and splitter (Cable box to unscramble all channels)
 Cable with a cable box and splitter (Cable box to unscramble only pay channels)